The 5 Axis CNC Machine for Patter Making with moving worktable is a high-precision engraving device that employs worktable movement as its core motion mechanism, enabling coordinated processing across five coordinate axes. Its key advantage lies in its ability to handle both large-scale workpiece machining and complex curved surface engraving.
Video Show of SF Series 4*8 5 Axis CNC Machine for Patter Making
Features and Advantages of SF Series 4*8 5 Axis CNC Machine for Patter Making:
1. 5-axis Wood Pattems Milling Router of SF Table Move Series be specifically designed for 3D machining and holding tight tolerances, which can hold much tighter and more consistent tolerances than held by hand. Widely be used for pattern and mould manufacturing with high requirements on precision and high finish.
2. The SF Table Move Series cnc router with table move stucture and high accuracy ball screws for a good performance. It has the characteristics of small layout, high efficiency and high speed. Most economical for medium size, light weight workpieces.
3. CHENcan sefl-engineered 5 axis rotary head combines powerful troque with exceptional rotational speed. Utilizing imported reduction gears and air braking system, it maintains precision for extended operation.
Application of SF Series 4*8 5 Axis CNC Machine for Patter Making:
Technical Parameters of SF Series 4*8 5 Axis CNC Machine for Patter Making:
| Stroke Size(mm) | X:3000 Y:1500 Z:1200 |
| 5 Axis Working Size(mm) | X:3000 Y:1500 Z:800 |
| Spindle | Italy HITECO 15Kw Spindle |
| Spindle Speed | 24000rpm/min |
| Spindle Cone | HSK 63F |
| A Axis | ±120° |
| C Axis | ±360° |
| Control CNC | HNC |
| Tool Change | 8 Positions |
| Drive Type | XYZ: High precision ball screws |
| Work Model | AC Servo Drive |
| Max Working Speed X/Y/Z(mm) | 40/40/10 |
| Max Rapid Speed X/Y/Z(m/min) | 60/60/20 |
| Positioning Accuracy X/Y/Z(mm/m) | 0.04/0.04/0.04 |
| Repeatability X/Y/Z(mm/m) | 0.025/0.025/0.025 |
| Work Table type | Iron Table with T slot |
| Air Pressure (kgf/cm2） | ≥0.08 |
| Total Power (KVA) | 38 |
| Gross Weight (T) | 11 |
Optional Configuration of Mold and Sculpture Making:
| Control CNC | Siemens, Syntec |
| Spindle | From 15kw up to 42kw, 24000rpm max. |
| Spindle Head | H Type-Double Shoulder Type |
| Work Table | Aluminum Table, Vacuum Table |
| Around Protection | Enclosure, Roof |
| Dust Suction System | Grids+hood |
| Vision Cameras | 2 cameras, 4 cameras |
| Tool Sensor | TSR27, NC4 |
| Probe | RMP600, RMP600 |
SF Series 4*8 5 Axis CNC Machine for Patter Making Project:
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
5 axis cnc machine is a high-precision and high-efficiency machine. Regular maintenance is important to keep its accuracy and extend its lifetime.
A. Daily maintenance be the most basic step (after shutdown):
1. Cleaning: Daily clean the work table after one day work, keep the appearance of the surface of the 5 axis cnc router, and prevent dust and debris from entering the equipment.
2. Lubrication: 5 axis cnc machine adopt auto lubricate system, which will lubricate the various parts of the machine according to the requirements automatically, but need to check the oil level in pump regularly.
3. Inspection: Check the hydraulic and pneumatic system pressures for normal operation and leaks; check the tool integrity and tool magazine for any abnormalities if have the tool magazine.
B. Weekly Maintenance (after shutdown): In addition to daily maintenance, perform a more comprehensive inspection and maintenance.
1. Deep Cleaning: Remove dust from the vacuum pump/dust collector/water chiller and replace filter (depending on the degree of contamination).
2. Component Inspection: Check the spindle for smooth operation and abnormal noise; and check the limit switches on each axis for sensitivity and effectiveness.
3. Tightening: Check all connecting pinion and nuts for looseness, especially those fastening the rack pinion/ ball screw nut/ motor reducer. Tighten them immediately if any looseness is detected.
C. Half-year maintenance (after shutdown): Systematic maintenance in accordance with the manual, focusing on accuracy and main components.
1. Accuracy Inspection: Use tools such as a dial indicator and micrometer to check spindle radial runout, axis accuracy, adjust any deviations promptly.
2. Lubrication System Inspection: Check the condition of the lubricating oil pump and clean the lubricating oil filter. Sample the lubricating oil in components such as the rail block and lubrication parts, inspect it, and replace it if necessary.
3. Electrical System Inspection: Open the electrical cabinet and clean any dust inside. Check that wiring connections are secure and that components such as contactors and relays are free of signs of corrosion.
FAQ for SF Series 4*8 5 Axis CNC Machine for Patter Making
Q1. What payment methods are supported?
We offer a variety of mainstream payment methods, which can be flexibly selected based on the cooperation practices of both parties, such as Telegraphic Transfer (T/T), Letter of Credit (L/C), and Alipay.
Q2. What trade methods are available?
We cover a variety of international trade terms to meet different logistics and liability requirements, such as FOB, CIF (Cost, Insurance, and Freight), FCA, and DDU. The final trade method can be determined through negotiation with us based on requirements such as cargo transportation arrangements and customs clearance responsibility division.
Q3. What does the after-sales service include?
We provide full-cycle after-sales support to ensure the stable operation of the equipment. Each device with a unique ID to facilitate quick device backup information and improve after-sales response efficiency.
Q4. Do you provide on-site engineer service? How are the related expenses covered?
Yes, we support on-site engineer service. Engineers can come to your factory for installation guidance, commissioning, and training services. Customers only need to pay the engineer’s round-trip airfare and local accommodation expenses.
Q5. How purchase?
Pay a deposit to confirm the order first, then we will immediately begin production (the deposit amount is negotiable). Second, after production is complete and before shipment, the customer check the machine at our facotry. Then delivery will be arranged upon receipt of customer’s confirmation and balance payment. In the end, our engineers come to your factory to provide on-site installation and training.
Q6. What if cannot find a suitable machines?
Don’t hesitate to contact us, Chencan professional technical team will recommend you the right machine according to your processing requirements.
